The specialist's opinion
A two-channel preamp for bass and / or double bass.
You can plug in a bass and switch between the two channels for added versatility or plug in two basses (or a bass and double bass) at the same time and switch easily from one instrument to the other.
The sound quality is unparalleled, Radial being renowned worldwide for manufacturing very high-end direct boxes. The Bassbone V2 also offers an effects loop and a switchable boost, an HPF, a 3-band EQ, a switch to adapt the input impedance to the piezo pickups. The bassist's Swiss army knife and Radial Engineering quality.
Specification
- LEVEL 1 and LEVEL 2: adjust the level of the instrument for each channel
- 3 BAND EQ: passive interactive EQ on channel 2 with Bass / Mid / High settings
- LOOP WET / DRY: mixes the unprocessed bass sound with that of the effects loop
- BOOST: up to 8 dB of boost
- LOOP ASSIGN: 3-position switch to assign the effects loop to one or both channels
- HPF-2: high pass filter for channel 2, 80 Hz / 150 Hz / off
- EQ-1: 3-position switch to select a `` flat '' EQ or 2 preset contour curves on channel 1
- FOOTSWITCH SELECT: Used with a bass, it switches the channels. With two basses, it switches the instruments
- PZB (input 2): piezo boost switch, recessed
- BLEND: recessed switch, activates the two channels for instruments with electro-acoustic sensor systems
- BOOST / MUTE: assigns the power boost or mute function to the BOOST footswitch, built-in switch
- FOOTSWITCH LOOP: activate / deactivate the effects
- FOOTSWITCH BOOST: activates the boost or mute function
- INPUT 1 & 2: 2 x standard 6.3mm mono jacks
- OUTPUT: 1 x standard 6.3 mm mono jack
- TUNER / OUTPUT-C: 1 x standard 6.3 mm mono jack
- SEND & RECV: 2 x standard 6.3mm mono jacks for effects loop
- SYMMETRICAL OUTPUT: XLR jack
- power supply (included): 15 V DC adapter (400 mA), (+) tip (-) sleeve
- ground lift
- dimensions (L x W x H) 203 x 107 x 48 mm
- weight 1.15 kg
- 3 BAND EQ: passive interactive EQ on channel 2 with Bass / Mid / High settings
- LOOP WET / DRY: mixes the unprocessed bass sound with that of the effects loop
- BOOST: up to 8 dB of boost
- LOOP ASSIGN: 3-position switch to assign the effects loop to one or both channels
- HPF-2: high pass filter for channel 2, 80 Hz / 150 Hz / off
- EQ-1: 3-position switch to select a `` flat '' EQ or 2 preset contour curves on channel 1
- FOOTSWITCH SELECT: Used with a bass, it switches the channels. With two basses, it switches the instruments
- PZB (input 2): piezo boost switch, recessed
- BLEND: recessed switch, activates the two channels for instruments with electro-acoustic sensor systems
- BOOST / MUTE: assigns the power boost or mute function to the BOOST footswitch, built-in switch
- FOOTSWITCH LOOP: activate / deactivate the effects
- FOOTSWITCH BOOST: activates the boost or mute function
- INPUT 1 & 2: 2 x standard 6.3mm mono jacks
- OUTPUT: 1 x standard 6.3 mm mono jack
- TUNER / OUTPUT-C: 1 x standard 6.3 mm mono jack
- SEND & RECV: 2 x standard 6.3mm mono jacks for effects loop
- SYMMETRICAL OUTPUT: XLR jack
- power supply (included): 15 V DC adapter (400 mA), (+) tip (-) sleeve
- ground lift
- dimensions (L x W x H) 203 x 107 x 48 mm
- weight 1.15 kg
Our specialists at your service
Effects pedals
