KRK ROKIT 5 G5

Whether you're working on a hit, film score, or a personal project, KRK Systems' Rokit Generation Five monitors give you the tools to capture every nuance of your sound with stunning clarity. Rokit Generation Five has three very useful listening modes. The Mix mode, with a flat phase and frequency response, is ideal for mixing, mastering and critical listening. Create mode is a more inspiring listening mode, ideal for writing, producing, and occasional listening. Focus mode is a listening mode centered on the middle frequencies, for a critical analysis of the middle frequency band, where vocals and most instruments have the most energy. They feature 25 combinations of EQs and settings that help minimize and correct problems in your acoustic environment and woven Kevlar® aramid fiber cone woofers for superior damping and modal burst control. The tweeters benefit from a highly damped silk dome acoustic diaphragm to smoothly extend the frequency range up to 40kHz. For maximum transient response and dynamic reproduction, the bi-amplified Class D power amplifiers drive the transducers evenly and more efficiently at reduced operating temperatures to ensure audio integrity during long working sessions. The Rokit Generation Five's silk dome tweeters produce a smooth, natural tone in the high frequencies. Silk, as an acoustic material, has a relatively low resonant frequency, resulting in a smoother and linear response over a wider range of frequencies. This allows for very precise audio reproduction, with minimal distortion or harshness. The smooth sound produced by these tweeters is less likely to tire the listener, even during prolonged listening sessions. The Rokit Generation Five high frequency tweeters and waveguide deliver controlled sound dispersion. This means that they can direct sound waves in a specific pattern, which is advantageous for the soundstage image and for minimizing unwanted reflections and interactions with room acoustics. The Rokit Generation Five tweeters feature excellent damping and resonance control mechanisms. This helps minimize unwanted resonances, ringing tones and distortions, resulting in sharper and more accurate sound reproduction. The tweeter's low-mass diaphragm allows it to respond quickly to high-frequency signals, improving transient response and music detail. Specifications: - Configuration: 2-Way Bass Reflex - System Type: Active Studio Monitor - Low Frequency Speaker: Woofer, 5 inch, Woven Kevlar® Aramid Fiber Cone, Ferrite Magnet - High Frequency Speaker : Tweeter, 1 inch, silk dome, copper cap, ferrite magnet - Frequency response (+/- 3 dB): 54 Hz - 30 kHz - Frequency range (+ 3 / -10 dB): 43 Hz - 40 kHz - Cutoff frequency: 2.27 kHz - Amplifier configuration: Bi-amplified (Class D) - HF amplifier output power *: 20 Watts - LF amplifier output power *: 35 Watts - Total power *: 55 Watts - Total dynamic power **: 130 Watts - Max SPL ***: 104 dB - Coverage angles ****: 155 ° Horizontal x 126 ° Vertical - Analogue input connector: XLR balanced / 1/4 ”TRS combo - Input impedance: 5.12kΩ Balanced - Signal to noise ratio (SNR):> 101.5 dB (low sensitivity setting, balanced),> 94 dB (high sensitivity) - Voltage d 'entry AC: 100 - 240VAC (+/- 10%), 50/60 Hz - Fuse type: 5x20mm T1A 250V - Cabinet construction: PVC vinyl coated MDF - Cabinet construction: Structurally reinforced for high impact - Product dimensions (H x W x D): 288 mm x 191 mm x 242 mm - Packaged dimensions (H x W x D): 400 mm x 260 mm x 320 mm - Product weight: 4.95 Kg - Weight packaged: 6.5 Kg - Integrated mounting points: For use with KRK wall / ceiling brackets * Rated amplifier output power measured at 1% THD + N ** Rated dynamic power measured as instantaneous peak power at 10% THD + N *** SPL Max calculated based on speaker sensitivity (1W @ 1M) and nominal dynamic power **** Average coverage angles -6dB at 900Hz to 9kHz points