Audio Technica ATW-2110b-D : photo 1
Audio Technica ATW-2110b-D : photo 2

Audio Technica ATW-2110b-D

Item No. : 180670

System :1 bodypack transmitter
Frequency range :656.125 - 678.500 MHz

Boullard Price:

539.–
Sur commandeOn orderWill be ordered for you as quick as possible.
Warranty : 2 years
Click and Collect

Click & Collect

Pick up in store

Tuesday to Saturday

The specialist's opinion

The Pro ATW-2110b-D is a wireless system with an ATW-R2100b receiver and an ATW-T210a UniPak bodypack transmitter.

Automatic frequency scan key to locate an open channel and 10 compatible switching channels to simplify operation in multiple systems; without confusion of frequency groups.

* True diversity reception operation allowing the best signal to be selected from two independent receiver sections, limiting level losses * Tone Lock ™ silencing system designed to prevent interference


Specification

Générale
System :1 bodypack transmitter
Transmission technology :Analog UHF
Frequency range :656.125 - 678.500 MHz
Specifications :* Number of Channels: 10 * Frequency Stability: ± 0.005%, controlled by phase lock * Modulation Mode: FM * Normal Deviation: ± 5kHz * Operating Range: 100m * Frequency Response: 100Hz to 15kHz
Transmitter :* Hf power: 10 mW * Parasitic emissions: Complies with national regulations * Input connections: High impedance, low impedance, polarization * Batteries: 2 x 1.5V AA alkaline (not included) * Power consumption: 150 mA typical * Duration Battery Life: Approximately 9 hours (depending on battery type and usage) * Dimensions: Width 66.0mm (2.60 ") x height 92.3mm (3.63") x depth 22.5mm (0.89 ") * Net Weight: 80g
Receiver :* Signal / noise ratio:> 100 dB excursion at 40 kHz (weighted according to A), maximum modulation 40 kHz * Total Harmonic Distortion: <1% (deviation 10 kHz at 1 kHz) * Sensitivity: 20 dBµV (S / N) 60 dB for 5 kHz deviation, IEC) * Intermediate frequency: 65.75 MHz, 10.7 MHz * Audio output: Unbalanced: 25 mV (1kHz, ± 5 kHz, 100k ohms) Balanced: 12.5 mV (1kHz, ± 5 kHz, 100k ohms) * Output Connectors: Unbalanced: 1/4 '' Jack Balanced: XLRM type

Our specialists at your service

Wireless microphones